libusbdev/src/usb_32v2.c

/* This file is the part of the Lightweight USB device Stack for STM32 microcontrollers
 *
 * Copyright ©2016 Dmitry Filimonchuk <dmitrystu[at]gmail[dot]com>
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *   http://www.apache.org/licenses/LICENSE-2.0
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <stdint.h>
#include <stdbool.h>
#include "stm32.h"
#include "../usb.h"

#if defined(USE_STMV2_DRIVER)

#define MAX_EP          6
#define MAX_RX_PACKET   128
#define MAX_CONTROL_EP  1
#define MAX_FIFO_SZ     320  /*in 32-bit chunks */

#define RX_FIFO_SZ      ((4 * MAX_CONTROL_EP + 6) + ((MAX_RX_PACKET / 4) + 1) + (MAX_EP * 2) + 1)

USB_OTG_GlobalTypeDef * const OTG  = (void*)(USB_OTG_FS_PERIPH_BASE + USB_OTG_GLOBAL_BASE);
USB_OTG_DeviceTypeDef * const OTGD = (void*)(USB_OTG_FS_PERIPH_BASE + USB_OTG_DEVICE_BASE);
volatile uint32_t * const OTGPCTL  = (void*)(USB_OTG_FS_PERIPH_BASE + USB_OTG_PCGCCTL_BASE);


inline static volatile uint32_t* EPFIFO(uint8_t ep) {
    return (uint32_t*)(USB_OTG_FS_PERIPH_BASE + USB_OTG_FIFO_BASE + (ep << 12));
}

inline static USB_OTG_INEndpointTypeDef* EPIN(uint8_t ep) {
    return (void*)(USB_OTG_FS_PERIPH_BASE + USB_OTG_IN_ENDPOINT_BASE + (ep << 5));
}

inline static USB_OTG_OUTEndpointTypeDef* EPOUT(uint8_t ep) {
    return (void*)(USB_OTG_FS_PERIPH_BASE + USB_OTG_OUT_ENDPOINT_BASE + (ep << 5));
}

inline static void Flush_RX(void) {
    _BST(OTG->GRSTCTL, USB_OTG_GRSTCTL_RXFFLSH);
    _WBC(OTG->GRSTCTL, USB_OTG_GRSTCTL_RXFFLSH);
}

inline static void Flush_TX(uint8_t ep) {
    _BMD(OTG->GRSTCTL, USB_OTG_GRSTCTL_TXFNUM,
         _VAL2FLD(USB_OTG_GRSTCTL_TXFNUM, ep) | USB_OTG_GRSTCTL_TXFFLSH);
    _WBC(OTG->GRSTCTL, USB_OTG_GRSTCTL_TXFFLSH);
}

void ep_setstall(uint8_t ep, bool stall) {
    if (ep & 0x80) {
        ep &= 0x7F;
        uint32_t _t = EPIN(ep)->DIEPCTL;
        if (_t & USB_OTG_DIEPCTL_USBAEP) {
            if (stall) {
                _BST(_t, USB_OTG_DIEPCTL_STALL);
            } else {
                _BMD(_t, USB_OTG_DIEPCTL_STALL,
                     USB_OTG_DIEPCTL_SD0PID_SEVNFRM | USB_OTG_DOEPCTL_SNAK);
            }
            EPIN(ep)->DIEPCTL = _t;
        }
    } else {
        uint32_t _t = EPOUT(ep)->DOEPCTL;
        if (_t & USB_OTG_DOEPCTL_USBAEP) {
            if (stall) {
                _BST(_t, USB_OTG_DOEPCTL_STALL);
            } else {
                _BMD(_t, USB_OTG_DOEPCTL_STALL,
                     USB_OTG_DOEPCTL_SD0PID_SEVNFRM | USB_OTG_DOEPCTL_CNAK);
            }
            EPOUT(ep)->DOEPCTL = _t;
        }
    }
}

bool ep_isstalled(uint8_t ep) {
    if (ep & 0x80) {
        ep &= 0x7F;
        return (EPIN(ep)->DIEPCTL & USB_OTG_DIEPCTL_STALL) ? true : false;
    } else {
        return (EPOUT(ep)->DOEPCTL & USB_OTG_DOEPCTL_STALL) ? true : false;
    }
}

void enable(bool enable) {
    if (enable) {
        /* enabling USB_OTG in RCC */
        _BST(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);
        /* Set Vbus enabled for USB */
        _BST(PWR->CR2, PWR_CR2_USV);
        /* select Internal PHY */
        OTG->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
        /* do core soft reset */
        _WBS(OTG->GRSTCTL, USB_OTG_GRSTCTL_AHBIDL);
        _BST(OTG->GRSTCTL, USB_OTG_GRSTCTL_CSRST);
        _WBC(OTG->GRSTCTL, USB_OTG_GRSTCTL_CSRST);
        /* configure OTG as device */
        OTG->GUSBCFG = USB_OTG_GUSBCFG_FDMOD | USB_OTG_GUSBCFG_PHYSEL |
                       _VAL2FLD(USB_OTG_GUSBCFG_TRDT, 0x06);
        /* configuring Vbus sense and powerup PHY */
#if defined(USBD_VBUS_DETECT)
        OTG->GCCFG |= USB_OTG_GCCFG_VBDEN | USB_OTG_GCCFG_PWRDWN;
#else
        OTG->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN | USB_OTG_GOTGCTL_BVALOVAL;
        OTG->GCCFG = USB_OTG_GCCFG_PWRDWN;
#endif
        /* restart PHY*/
        *OTGPCTL = 0;
        /* soft disconnect device */
        _BST(OTGD->DCTL, USB_OTG_DCTL_SDIS);
        /* Setup USB FS speed and frame interval */
        _BMD(OTGD->DCFG, USB_OTG_DCFG_PERSCHIVL | USB_OTG_DCFG_DSPD,
             _VAL2FLD(USB_OTG_DCFG_PERSCHIVL, 0) | _VAL2FLD(USB_OTG_DCFG_DSPD, 0x03));
        /* unmask EP interrupts */
        OTGD->DIEPMSK = USB_OTG_DIEPMSK_XFRCM;
        /* unmask core interrupts */
        OTG->GINTMSK  = USB_OTG_GINTMSK_USBRST | USB_OTG_GINTMSK_ENUMDNEM |
#if !defined(USBD_SOF_DISABLED)
                        USB_OTG_GINTMSK_SOFM |
#endif
                        USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_WUIM |
                        USB_OTG_GINTMSK_IEPINT | USB_OTG_GINTMSK_RXFLVLM;
        /* clear pending interrupts */
        OTG->GINTSTS = 0xFFFFFFFF;
        /* unmask global interrupt */
        OTG->GAHBCFG = USB_OTG_GAHBCFG_GINT;
        /* setting max RX FIFO size */
        OTG->GRXFSIZ = RX_FIFO_SZ;
        /* setting up EP0 TX FIFO SZ as 64 byte */
        OTG->DIEPTXF0_HNPTXFSIZ = RX_FIFO_SZ | (0x10 << 16);
    } else {
        if (RCC->AHB2ENR & RCC_AHB2ENR_OTGFSEN) {
            _BCL(PWR->CR2, PWR_CR2_USV);
            _BST(RCC->AHB2RSTR, RCC_AHB2RSTR_OTGFSRST);
            _BCL(RCC->AHB2RSTR, RCC_AHB2RSTR_OTGFSRST);
            _BCL(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);
        }
    }
}

void reset (void) {
   // _BST(OTG->GRSTCTL, USB_OTG_GRSTCTL_CSRST);
   // _WBC(OTG->GRSTCTL, USB_OTG_GRSTCTL_CSRST);
}


uint8_t connect(bool connect) {
    uint8_t res;
#if defined(USBD_VBUS_DETECT)
    #define SET_GCCFG(x) OTG->GCCFG = USB_OTG_GCCFG_VBDEN | (x)
#else
    #define SET_GCCFG(x) OTG->GCCFG = (x)
#endif
    SET_GCCFG(USB_OTG_GCCFG_BCDEN | USB_OTG_GCCFG_DCDEN);
    if (OTG->GCCFG & USB_OTG_GCCFG_DCDET) {
        SET_GCCFG(USB_OTG_GCCFG_BCDEN | USB_OTG_GCCFG_PDEN);
        if (OTG->GCCFG & USB_OTG_GCCFG_PS2DET) {
            res = usbd_lane_unk;
        } else if (OTG->GCCFG & USB_OTG_GCCFG_PDET) {
            SET_GCCFG(USB_OTG_GCCFG_BCDEN | USB_OTG_GCCFG_SDEN);
            if (OTG->GCCFG & USB_OTG_GCCFG_SDET) {
                res = usbd_lane_dcp;
            } else {
                res = usbd_lane_cdp;
            }
        } else {
            res = usbd_lane_sdp;
        }
    } else {
        res = usbd_lane_dsc;
    }
    SET_GCCFG(USB_OTG_GCCFG_PWRDWN);
    if (connect) {
        _BCL(OTGD->DCTL, USB_OTG_DCTL_SDIS);
    } else {
        _BST(OTGD->DCTL, USB_OTG_DCTL_SDIS);
    }
    return res;
}

void setaddr (uint8_t addr) {
    _BMD(OTGD->DCFG, USB_OTG_DCFG_DAD, addr << 4);
}

/**\brief Helper. Set up TX fifo
 * \param ep endpoint index
 * \param epsize required max packet size in bytes
 * \return true if TX fifo is successfully set
 */
static bool set_tx_fifo(uint8_t ep, uint16_t epsize) {
    uint32_t _fsa = OTG->DIEPTXF0_HNPTXFSIZ;
    /* calculating initial TX FIFO address. next from EP0 TX fifo */
    _fsa = 0xFFFF & (_fsa + (_fsa >> 16));
    /* looking for next free TX fifo address */
    for (int i = 0; i < (MAX_EP - 1); i++) {
        uint32_t _t = OTG->DIEPTXF[i];
        if ((_t & 0xFFFF) < 0x200) {
            _t = 0xFFFF & (_t + (_t >> 16));
            if (_t > _fsa) {
                _fsa = _t;
            }
        }
    }
    /* calculating requited TX fifo size */
    /* getting in 32 bit terms */
    epsize = (epsize + 0x03) >> 2;
    /* it must be 16 32-bit words minimum */
    if (epsize < 0x10) epsize = 0x10;
    /* checking for the available fifo */
    if ((_fsa + epsize) > MAX_FIFO_SZ) return false;
    /* programming fifo register */
    _fsa |= (epsize << 16);
    OTG->DIEPTXF[ep - 1] = _fsa;
    return true;
}

bool ep_config(uint8_t ep, uint8_t eptype, uint16_t epsize) {
    if (ep == 0) {
        /* configureing control endpoint EP0 */
        uint32_t mpsize;
        if (epsize <= 0x08) {
            epsize = 0x08;
            mpsize = 0x03;
        } else if (epsize <= 0x10) {
            epsize = 0x10;
            mpsize = 0x02;
        } else if (epsize <= 0x20) {
            epsize = 0x20;
            mpsize = 0x01;
        } else {
            epsize = 0x40;
            mpsize = 0x00;
        }
        /* EP0 TX FIFO size is setted on init level */
        /* enabling RX and TX interrupts from EP0 */
        OTGD->DAINTMSK |= 0x00010001;
        /* setting up EP0 TX and RX registers */
        /*EPIN(ep)->DIEPTSIZ  = epsize;*/
        EPIN(ep)->DIEPCTL = mpsize | USB_OTG_DIEPCTL_SNAK;
        /* 1 setup packet, 1 packets total */
        EPOUT(ep)->DOEPTSIZ = epsize | (1 << 29) | (1 << 19);
        EPOUT(ep)->DOEPCTL = mpsize | USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK;
        return true;
    }
    if (ep & 0x80) {
        ep &= 0x7F;
        USB_OTG_INEndpointTypeDef* epi = EPIN(ep);
        /* configuring TX endpoint */
        /* setting up TX fifo and size register */
        if ((eptype == USB_EPTYPE_ISOCHRONUS) ||
            (eptype == (USB_EPTYPE_BULK | USB_EPTYPE_DBLBUF))) {
            if (!set_tx_fifo(ep, epsize << 1)) return false;
        } else {
            if (!set_tx_fifo(ep, epsize)) return false;
        }
        /* enabling EP TX interrupt */
        OTGD->DAINTMSK |= (0x0001UL << ep);
        /* setting up TX control register*/
        switch (eptype) {
        case USB_EPTYPE_ISOCHRONUS:
            epi->DIEPCTL = USB_OTG_DIEPCTL_EPENA | USB_OTG_DIEPCTL_CNAK |
                           (0x01 << 18) | USB_OTG_DIEPCTL_USBAEP |
                           USB_OTG_DIEPCTL_SD0PID_SEVNFRM |
                           (ep << 22) | epsize;
            break;
        case USB_EPTYPE_BULK:
        case USB_EPTYPE_BULK | USB_EPTYPE_DBLBUF:
            epi->DIEPCTL = USB_OTG_DIEPCTL_SNAK | USB_OTG_DIEPCTL_USBAEP |
                            (0x02 << 18) | USB_OTG_DIEPCTL_SD0PID_SEVNFRM |
                            (ep << 22) | epsize;
            break;
        default:
            epi->DIEPCTL = USB_OTG_DIEPCTL_SNAK | USB_OTG_DIEPCTL_USBAEP |
                            (0x03 << 18) | USB_OTG_DIEPCTL_SD0PID_SEVNFRM |
                            (ep << 22) | epsize;
            break;
        }
    } else {
        /* configuring RX endpoint */
        USB_OTG_OUTEndpointTypeDef* epo = EPOUT(ep);
        /* setting up RX control register */
        switch (eptype) {
        case USB_EPTYPE_ISOCHRONUS:
            epo->DOEPCTL = USB_OTG_DOEPCTL_SD0PID_SEVNFRM | USB_OTG_DOEPCTL_CNAK |
                           USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_USBAEP |
                           (0x01 << 18) | epsize;
            break;
        case USB_EPTYPE_BULK | USB_EPTYPE_DBLBUF:
        case USB_EPTYPE_BULK:
            epo->DOEPCTL = USB_OTG_DOEPCTL_SD0PID_SEVNFRM | USB_OTG_DOEPCTL_CNAK |
                           USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_USBAEP |
                           (0x02 << 18) | epsize;
            break;
        default:
            epo->DOEPCTL = USB_OTG_DOEPCTL_SD0PID_SEVNFRM | USB_OTG_DOEPCTL_CNAK |
                           USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_USBAEP |
                           (0x03 << 18) | epsize;
            break;
        }
    }
    return true;
}

void ep_deconfig(uint8_t ep) {
    ep &= 0x7F;
    volatile USB_OTG_INEndpointTypeDef*  epi = EPIN(ep);
    volatile USB_OTG_OUTEndpointTypeDef* epo = EPOUT(ep);
    /* deconfiguring TX part */
    /* disable interrupt */
    OTGD->DAINTMSK &= ~(0x10001 << ep);
    /* decativating endpoint */
    _BCL(epi->DIEPCTL, USB_OTG_DIEPCTL_USBAEP);
    /* flushing FIFO */
    Flush_TX(ep);
    /* disabling endpoint */
    if ((epi->DIEPCTL & USB_OTG_DIEPCTL_EPENA) && (ep != 0)) {
        epi->DIEPCTL = USB_OTG_DIEPCTL_EPDIS;
    }
    /* clean EP interrupts */
    epi->DIEPINT = 0xFF;
    /* deconfiguring TX FIFO */
    if (ep > 0) {
        OTG->DIEPTXF[ep-1] = 0x02000200 + 0x200 * ep;
    }
    /* deconfigureing RX part */
    _BCL(epo->DOEPCTL, USB_OTG_DOEPCTL_USBAEP);
    if ((epo->DOEPCTL & USB_OTG_DOEPCTL_EPENA) && (ep != 0)) {
        epo->DOEPCTL = USB_OTG_DOEPCTL_EPDIS;
    }
    epo->DOEPINT = 0xFF;
}

int32_t ep_read(uint8_t ep, void* buf, uint16_t blen) {
    uint32_t len;
    volatile uint32_t *fifo = EPFIFO(0);
    USB_OTG_OUTEndpointTypeDef* epo = EPOUT(ep);
    /* no data in RX FIFO */
    if (!(OTG->GINTSTS & USB_OTG_GINTSTS_RXFLVL)) return -1;
    ep &= 0x7F;
    if ((OTG->GRXSTSR & USB_OTG_GRXSTSP_EPNUM) != ep) return -1;
    /* pop data from fifo */
    len = _FLD2VAL(USB_OTG_GRXSTSP_BCNT, OTG->GRXSTSP);
    for (unsigned i = 0; i < len; i +=4) {
        uint32_t _t = *fifo;
        if (blen >= 4) {
            *(__attribute__((packed))uint32_t*)buf = _t;
            blen -= 4;
            buf += 4;
        } else {
            while (blen){
                *(uint8_t*)buf = 0xFF & _t;
                _t >>= 8;
                blen --;
            }
        }
    }
    _BST(epo->DOEPCTL, USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
    return len;
}

int32_t ep_write(uint8_t ep, void *buf, uint16_t blen) {
    ep &= 0x7F;
    volatile uint32_t* _fifo = EPFIFO(ep);
    USB_OTG_INEndpointTypeDef* epi = EPIN(ep);
    /* transfer data size in 32-bit words */
    uint32_t  _len = (blen + 3) >> 2;
    /* no enough space in TX fifo */
    if (_len > epi->DTXFSTS) return -1;
    if (ep != 0 && epi->DIEPCTL & USB_OTG_DIEPCTL_EPENA) {
        return -1;
    }
    epi->DIEPTSIZ = 0;
    epi->DIEPTSIZ = (1 << 19) + blen;
    _BMD(epi->DIEPCTL, USB_OTG_DIEPCTL_STALL, USB_OTG_DOEPCTL_EPENA | USB_OTG_DOEPCTL_CNAK);
    while (_len--) {
        *_fifo = *(__attribute__((packed)) uint32_t*)buf;
        buf += 4;
    }
    return blen;
}

uint16_t get_frame (void) {
    return _FLD2VAL(USB_OTG_DSTS_FNSOF, OTGD->DSTS);
}

void evt_poll(usbd_device *dev, usbd_evt_callback callback) {
    uint32_t evt;
    uint32_t ep = 0;
    while (1) {
        uint32_t _t = OTG->GINTSTS;
        /* bus RESET event */
        if (_t & USB_OTG_GINTSTS_USBRST) {
            OTG->GINTSTS = USB_OTG_GINTSTS_USBRST;
            for (uint8_t i = 0; i < MAX_EP; i++ ) {
                ep_deconfig(i);
            }
            Flush_RX();
            continue;
        } else if (_t & USB_OTG_GINTSTS_ENUMDNE) {
            OTG->GINTSTS = USB_OTG_GINTSTS_ENUMDNE;
            evt = usbd_evt_reset;
        } else if (_t & USB_OTG_GINTSTS_IEPINT) {
            for (;; ep++) {
                USB_OTG_INEndpointTypeDef* epi = EPIN(ep);
                if (ep >= MAX_EP) return;
                if (epi->DIEPINT & USB_OTG_DIEPINT_XFRC) {
                    epi->DIEPINT = USB_OTG_DIEPINT_XFRC;
                    evt = usbd_evt_eptx;
                    ep |= 0x80;
                    break;
                }
            }
        } else if (_t & USB_OTG_GINTSTS_RXFLVL) {
            _t = OTG->GRXSTSR;
            ep = _t & USB_OTG_GRXSTSP_EPNUM;
            switch (_FLD2VAL(USB_OTG_GRXSTSP_PKTSTS, _t)) {
            case 0x02:
                evt = usbd_evt_eprx;
                break;
            case 0x06:
                evt = usbd_evt_epsetup;
                break;
            default:
                OTG->GRXSTSP;
                continue;
            }
#if !defined(USBD_SOF_DISABLED)
        } else if (_t & USB_OTG_GINTSTS_SOF) {
            OTG->GINTSTS = USB_OTG_GINTSTS_SOF;
            evt = usbd_evt_sof;
#endif
        } else if (_t & USB_OTG_GINTSTS_USBSUSP) {
            evt = usbd_evt_susp;
            OTG->GINTSTS = USB_OTG_GINTSTS_USBSUSP;
        } else if (_t & USB_OTG_GINTSTS_WKUINT) {
            OTG->GINTSTS = USB_OTG_GINTSTS_WKUINT;
            evt = usbd_evt_wkup;
        } else {
            /* no more supported events */
            return;
        }
        return callback(dev, evt, ep);
    }
}

static uint32_t fnv1a32_turn (uint32_t fnv, uint32_t data ) {
    for (int i = 0; i < 4 ; i++) {
        fnv ^= (data & 0xFF);
        fnv *= 16777619;
        data >>= 8;
    }
    return fnv;
}

uint16_t get_serialno_desc(void *buffer) {
    struct  usb_string_descriptor *dsc = buffer;
    uint16_t *str = dsc->wString;
    uint32_t fnv = 2166136261;
    fnv = fnv1a32_turn(fnv, *(uint32_t*)(UID_BASE + 0x00));
    fnv = fnv1a32_turn(fnv, *(uint32_t*)(UID_BASE + 0x04));
    fnv = fnv1a32_turn(fnv, *(uint32_t*)(UID_BASE + 0x08));
    for (int i = 28; i >= 0; i -= 4 ) {
        uint16_t c = (fnv >> i) & 0x0F;
        c += (c < 10) ? '0' : ('A' - 10);
        *str++ = c;
    }
    dsc->bDescriptorType = USB_DTYPE_STRING;
    dsc->bLength = 18;
    return 18;
}

const struct usbd_driver usb_stmv2 = {
    USBD_HW_ADDRFST | USBD_HW_BC,
    enable,
    reset,
    connect,
    setaddr,
    ep_config,
    ep_deconfig,
    ep_read,
    ep_write,
    ep_setstall,
    ep_isstalled,
    evt_poll,
    get_frame,
    get_serialno_desc,
};

#endif //USE_STM32V2_DRIVER